40496501TH Rev.1 1589 The printer can normally operate, but not start printing.• In the event of the use of optional serial board, go to 9-1 .• In the event of the use of MUPIS card, go to 9-2 .• Can the printer perform the self-test.Yes No• Replace the PMA board.t• Is the interface cable properly connected?Yes No• Properly reconnect it.t• Can the printer recover after the interface cable is replaced?No Yes• Endt• Which of parallel or serial is used for the interface?Parallel Serial• Is the settings of serial interface correct?Yes No• Accurately reset it.t• Is the connection of cable properly made to the CN6 on the PMA board and the CN1 on the PHAboard?Yes No• Properly reconnect it.t• Can the printer recover after the connection cable between the CN6 on the PMA board and theCN1 on the board is replaced?No Yes• Endt• Can the printer recover after the PHA board is replaced?No Yes• Endt• Replace the PMA board.
