40496501TH Rev.1 2122. Maintenance mode 1(1) DIP Switch Settings(2) Power ON Switch FunctionDIP Switch(O: ON, X: OFF, –: ignored) Function34 12Maintence function enabled mode– – –Switch Function(Valid when DIP switch-1 is ON)SHIFTON-LINEPATH/TOFCON-FIGLFFF/LOADPARKTEARStarts learning function for slice level ofpaper width sensor.Starts auto-gap test.Gap open/close test.Starts gap close.Starts ON/OFF test for all sensors.Starts the alignment of print start positionsensor.Resets the counter of print characternumberStarts AG correction mode.Starts AG adjustment aid mode.Flash Loading ModeStarts aging mode (10 min.)Starts aging mode (5 min.)The above switches are also valid during Limited Operation.The empty boxes indicate not-pressed switches.: indicates that the switch is pressed.
