40496501TH Rev.1 86WheelWheelPin wheelMatch the position of marksRear tracor Assy Gears phase drawing4Match the direction of projections8 Assembling friction pieceOpen up the notch to 1mm and assemble it,positioning the notch as shown in figure.Notch is rotated by 45°Rotated notch45°1. Matching the phase of pin tractorsa. Match the direction of pin wheel projections on right/left pin tractor to that of mark on the 2(rear tractor drive gear).b. Match the direction of wheel projections on right/left pin tractor to that of mark on 4 (drive gearB), and install 2 (drive gear B) to 53 (rear drive shaft of the rear tractor Assy) at a positionwhere the directions of marks on 4 (drive gear B) and 2 (rear tractor drive gear) match.
