IV - 66Section IV - TCP/IPOKI OkiLAN 6010e User’s GuideOkiNet for TCP/IP – Winsock Errors• If you see an error before OkiNet for TCP/IPappears on the screen, try setting a hostname in the hosts file in the Windowsdirectory (check the documentation for yourWindows TCP/IP stack).• If you have difficulty seeing a particularOkiLAN 6010e, try moving the device ontothe same subnet as the computer running theutility.• If OkiNet for TCP/IP gives you the Winsockerror: Could not bind to socket, use theSpecial Options dialog under the File menuto change the Discovery UDP Port to adifferent port number.Hardware Error MessagesST: Cable not connectedSelf-test has determined that the network cable is notconnected.• Check the cable connection to the OkiLAN6010e.• Move the OkiLAN 6010e to another knownworking node.
