429. Special Mode (Test Print, Setup Menu...)9-1. Test PrintEnsure that paper is set in the printer. Turn off the power switch on the printer,then turn it on again while pressing the FEED button on the control panel. Thisoutputs the following printout.Caution: Press and hold the FEED button until the printer startsprinting.Special Mode1.Test Print2.Setup Menu3.LAN Setup Menu4.Hex Dump5.Command Trace6.Sample Print7.EndPress FEED button for the number of timesas the same as your selecting item, andwait more than 1 second.Special Mode1.Test Print2.Setup Menu3.Hex Dump4.Command Trace5.Sample Print6.EndPress FEED button for the number of timesas the same as your selecting item, andwait more than 1 second.用 紙 送 り 方 向用紙送り方向Paper feedPaper feed directionDual interface model Triple interface modelThen Press the FEED button once (select 1. Test Print) to start a test print.The printer automatically cuts the paper and stops after performing a set amountof printing. To terminate the test print while in progress, press the FEED button.This cuts the paper and terminates printing.
