55Item Description Setting Value8 USB Soft ResetSpecifies whether a USB Soft Resettriggers a hardware reset when usingprinter class USB.12EnableDisable*1 " INIT(#25)Reset "Only Dual interface model.(2) Memory Switch 2 GroupItem Description Setting Value1 Cover Open Error Recovery method for Cover Open Errorduring print12Auto RecoveryRecovery by CMND2 ErrorWhat to do at power on or after recoveryfrom error"Auto Recovery": Perform auto recoveryto enable data reception."Recovery by CMND": Discard anyreceived data until a reset command isreceived.12Auto RecoveryRecovery by CMND3 Batch (COM IF) Specifies whether to use batch printingfor the serial interface12EnableDisable4 Batch (Other IF) Specifies whether to use batch printingfor the USB or LAN interface12EnableDisable5 Serial NumberSpecifies iSerial Number notification forUSB"Disable": Returns “0” as the iSerialNumber."Enable": Returns the manufacturingserial number as the iSerialNumber12EnableDisable6 ASBSpecifies whether to enable the automaticstatus transmission function(ASB: Automatic Status Back)12EnableDisable7 Font-BSpecifies the number of columns for fontB (horizontal x vertical)"Mode1" 10x24"Mode2" 9x2412Mode1Mode2
