8212-2. Cutter Specifications(1) Cutting Method: Partial cut (the paper remains connected at one point)Caution: Do not use the cutter continuously at a rate exceeding 10 cutsper minute (1 cut per 6 seconds or more). Excessive use maycause a malfunction.12-3. Paper Roll Supply Specifications(1) Loading Method: Rolls are loaded manually.(2) Paper Near End: Detected when the remaining paper length is inadequate.Caution: Core diameter φ18mm is supported.12-4. Interface Specifications(1) Serial (RS-2332C)(2) USB (USB 2.0 Full-speed)(3) LAN (10BASE/100BASE-T)
