104 LP-1030/LP-1030-MF User's Manual for Basic Printer OperationPorts Settings MenuIn the ports setting menu, set the communication protocol and the PDL used foreach port.The Printer is equipped as standard with an Ethernet interface connector throughwhich 10 logical ports can be used.The settings for the protocol of each port are set in this menu.ComputerPort 10Port 7Port 6Port 1EthernetNote The system is reset after the setting in this menu is changed. If the Printer contains waiting jobs, only browsing is available. A total of 10 ports is available, including XTP, LPD, and FTP. Common Settingsn Connection TimeoutSelect a wait time to close the TCP port. The Printer starts counting the time whenthe Printer is not receiving data during the data transmission.Before Use Basic Operations Menu Functions Authenticationfunction Troubleshooting AppendixChapterChapterChapterChapterChapter12345