6 LP-1030/LP-1030-MF User's Manual for Basic Printer OperationBe sure to remove the dust on the power plug and the socket. Do not use adusty plug as a current leak due to humidity on its surface may heat the plugand result in fire.Do not fix, twist, bind, modify, stretch, or bend excessively the power cord. Donot put heavy object on it. A damaged power cord may heat and result in fire orelectrical shock.If the power cord is cut or if the wires are exposed, ask a service representativefor replacement.Using a damaged power cord may result in fire or electrical shock.CautionDo not disassemble or modify the toner cartridge.The toner on your skin will have a negative effect.If ink stains your skin or clothing, wash with soap and water immediately.To prevent a toner leakage, do not drop the toner cartridge nor expose it to strongimpacts.If toner gets into your eyes, do not rub your eyes, and wash the toner out. Visit adoctor immediately.As the roll paper is heavy, handle it carefully to make sure that you do not drop it.Dropping the roll paper on your feet may result in injury.When installing the roll paper, use the cutter to cut the end of the paper. At thistime, be careful not to injure yourself on the cutter.Install the Printer close to a power outlet. Make sure the outlet is easy to reach incase the power plug needs to be disconnected in an emergency.When connecting and disconnecting the power cord, hold it by the plug orconnector.To prevent a fire, electric shock, or malfunction, avoid pulling the cord.
