109LP-1030/LP-1030-MF User's Manual for Basic Printer OperationT Setup Items in PDL Settings Menu- Format Parameters (only with HP-GL and D-SCAN)- Pen Parameters (only with HP-GL and D-SCAN)- Raster ParametersThe PDL Setting menu is browsed or changed even during printing. However, anychanged parameters are valid only from the job received after the change.At the end of the setup operation, changed parameters are saved automatically,while the browsed parameters are not saved.The following sections describe the setting parameter tables in the PDL Settingmenu, and explain each parameter. While most of the setting parameters areshared by all the PDL, some parameters are not displayed depending on the PDL,which is explained in the list.Example: Only with D-SCAN Setting Parameter Table in PDL Setting MenuIn the PDL Setting menu, PDL parameters are selected.By setting the PDL parameters, print modes are specified.In the Setup menu, the following items are also available.Menu Item FunctionPDL SettingPort n_HP-GLSets the parameter for the PDL table ofEthernet port n. Settings for printing inHP-GL format are performed with thisparameter.Port n_D-SCANSets the parameter for the PDL table ofEthernet port n. Settings for printing inD-SCAN format are performed with thisparameter.Port n_TIFFSets the parameter for the PDL table ofEthernet port n. Settings for printingin TIFF format are performed with thisparameter.Port n_CALSSets the parameter for the PDL table ofEthernet port n. Settings for printing inCALS format are performed with thisparameter.Before Use Basic Operations Menu Functions Authenticationfunction Troubleshooting AppendixChapterChapterChapterChapterChapter12345