C3530 MFP User’s GuideMaintenance > 10211. Close the printer top cover and press down firmly so thatthe cover latches closed.12. Gently lower the scanner on to its supports.13. Switch the MFP ON.Switch ON.jpgFUSER REPLACEMENTThe fuser is located inside the printer just behind the four imagedrum units.3. Yellow cartridge 4. Black cartridgeWARNING!If the MFP has recently been powered on, some fusercomponents will be very hot. Handle the fuser withextreme care, holding it only by its handle, which willonly be mildly warm to the touch. A warning labelclearly indicates the area. If in doubt, switch theprinter off and wait at least 10 minutes for the fuser tocool before opening the printer cover.Downloaded From ManualsPrinter.com Manuals
