Oki c3530 User Manual

Also see for C3530: Network guide User guide Setup guide User guide Setup guide

C3530 MFP User’s GuideOperation > 59Reduce/enlarge: Select from a pre-determined figure:A4>A5 (70%), Leg>Let (78%), Fit to page (98%), 100%,B5>A4 (115%), Let>Leg (127%), A5>A4 (141%), or setto a percentage in increments of 1% by using theCustom (25%~400%) setting.Paper Size: Select from: Legal, Letter, A4, A5, B5.Image Quality: Select from Mixed, Photo, HiRes. Mixed,HiRes. Photo.Density: Sets scan density - -3, -2, -1, 0, +1, +2, +3Input tray: Select which paper tray you are using,Tray 1, Manual Feeder.Collate: Select from ON, OFFN-up: Sets the number of images on a page.Select from: 1in1, 2in1, 4in1 (horizontal), 4in1 (vertical).Edge erase: This sets the peripheral areas of thedocument to block out.Select from: 0.00 in, 0.25 in, 0.50 in, 0.75 in, 1.00 inor0 mm, 6 mm, 13 mm, 19 mm, 25 mmNOTE:N-up can only be changed from 1in1 if paper size is set to A4or Letter and documents are scanned from the ADF. Collatealways defaults to “OFF”, Reduce/enlarge to “100%”, Edgeerase to “0mm (0.001in)” and Margin shift-Right/Bottom to 0mm (0.00in).NOTE:The setting displayed, mm or inch, depends on the setting inAdmin Setup - System Setup - Unit of Measure in Menu Mode.If Edge Erase is set to other than "0 mm" or "0.00 in,"Reduce/Enlarge always defaults to "100%," N-up to "1in1,"and Margin Shift-Right/Bottom to "0 mm (0.00 in)".Downloaded From ManualsPrinter.com Manuals