Oki c3530 User Manual

Also see for C3530: Network guide User guide Setup guide User guide Setup guide

C3530 MFP User’s GuideConfiguring your machine > 371. In the top level screen, scroll down to Menu and selectusing the Enter key.2. In the drop down menu, scroll down to the Admin Menuand select using the Enter key. Enter the password3. In the drop down menu, scroll down to Fax Setup andselect using the Enter key.4. In the drop down menu, scroll down to Basic Setup andselect using the Enter key.5. In the drop down menu, scroll down to the RingResponse and select using the Enter key.6. In the drop down menu, scroll down to the response timerequired and select using the Enter key.7. Using the Left arrow key, return to the top level menu.ACCESS CONTROLThe operation and functionality of this machine can be limited toauthorised personnel only by the simple introduction of a 4-9digit PIN (Personal Identification Number). This is known asAccess Control. The greater the number of digits in the PIN - themore secure it is.Enable/Disable Access Control> Access Control Enable/Disable is switched in Menu>Admin Setup>System Setup>Access Control.Enabling Access control> With Access Control set to Enable, the display reverts tothe System Setup screen immediately following thesetting change. If one of the functions such as Print, FaxSend or PC Scan is running however, the display will onlyrevert to the System Setup screen when the task hasbeen completed.Entering PIN ID> With Access Control Enabled, entering a PIN ID isrequired to enable setting up various utilities.> Enter the PIN ID via the Ten Key pad.Downloaded From ManualsPrinter.com Manuals