Field Service Ver. 2.0 May 2008 2. Other13ZU-603Maintenance2.3.5 Z folding unitA. Removal from the finisher1. Open the front door of finisher [1].2. Remove two screws [2] and slide thefinisher as shown in the illustration.NOTE• To mount the finisher, align thehook portions of the mountingbracket [1] and [2] with the upperand lower holes [3] in the finisher.Then, push the finisher toward therear.3. Disconnect three connectors [1] andremove the finisher.A07TF2C500DA[2][1]A07TF2C501DA[1][3][2]A07TF2C502DA[1][1]Y107910-0 Service Manual
