System SettingsADVANCED OPERATION GUIDE 3-212 Press S or T to select Sleepmode time and press [Enter].3 Press < or > to select the timerequired from 1 to 240 minutes or1 to 120 minutes and press[Enter].4 Press [Reset]. The Copier Basic screen returns.Auto Low Power TimeUse to set the time that elapses before Low Power mode is automaticallyactivated.Time that can be set:• Inch Specification — 1 to 240 minutes (in 1 minute increments)• Metric Specification — 1 to 120 minutes (in 1 minute increments)1 Display the Machine default screen, refer to Access the Machine DefaultScreen, on page 3-15.2 Press S or T to select Low powertime and press [Enter].3 Press < or > to select the timerequired from 1 to 240 minutes or1 to 120 minutes and press[Enter].4 Press [Reset]. The Copier Basic screen returns.Copy Output DestinationUse to set the paper output destination with priority for copying.Machine Default:Sleep Mode TimeOrig. Direction:Rear:30:Specific P. Type Fast ModeMin.1-240Sleep Mode Time:Min.30 Min.Machine Default:Orig. Direction Rear::Low Power Time :Sleep Mode Time 30Min.15Min.Low Power Mode Time:1-240Min.15 Min.Setting Item Output DestinationTop Tray Main body output trayFinisher Optional FinisherJob Separator Optional Job Separator
