Printer SettingsADVANCED OPERATION GUIDE 2-49Form Feed TimeoutIf this machine does not receive any information indicating the end of dataafter receiving the last data, the machine waits for a certain time withoutprinting the last page. When the preset time elapses, the machineautomatically performs a form feed. If you set the time to 0, the machinedoes not perform a form feed until GO is manually selected.1 Display the Others screen, refer to Access the Others Screen, on page 2-48.2 Press S or T to select FormFeed Time Out and press [Enter].3 Press < or > to set the time, 0 to495 seconds in 5 secondincrements can be selected.Press [Enter].4 Press [Reset]. The Printer Basic screen displays.Received Data DumpYou can print data received as hexadecimal codes for debuggingprograms and files.1 Display the Others screen, refer to Access the Others Screen, on page 2-48.2 Press S or T to select Print HEX-DUMP and press [Enter].3 Press S or T to select OK andpress [Enter].Waiting displays and then thePrinter Basic screen.4 Send data to the printer, dump pages are printed.5 Press S or T to select GO and press [Enter].6 Press [Reset]. The Printer Basic screen displays.BackForm Feed Time-OutOthersPrint HEX-DUMP(0Form Feed Time-Out30 495)sec.BackForm Feed Time-OutOthersPrint HEX-DUMPBackOKPrint HEX-DUMP
