Job Accounting4-14 ADVANCED OPERATION GUIDE2 Press S or T to select JobAccountg Def. Set and press[Enter].3 Press S or T to select Fax JobAccountng and press [Enter].4 Press S or T to select Off or Onand press [Enter].5 On completion, press S or T toselect End and press [Enter].Excess Limit SettingUse to select which action the machine takes when the limit set has beenexceeded. You can select to prohibit use of the machine immediately,prohibit use after the current job has completed, or to display a warningmessage.1 Display the Job Accounting screen, refer to Access the Job AccountingScreen, on page 4-3.2 Press S or T to select JobAccountg Def. Set and press[Enter].3 Press S or T to select Excesslimit Set and press [Enter].4 Press S or T to select Stop jobimmediately, Stop after job doneor Only warning and press[Enter].5 On completion, press S or T toselect End and press [Enter].Job Accountg Def. Set.Job Accounting:Each Job Accounting TLEdit Job Accounting[ ]OnFax Job AccountngJob Accounting Default Setting:Prnt Job Account.Scanner Job Accnt: On: On: OnFax Job Accounting:OffOn*Prnt Job Account.Job Accounting Default Setting:EndCopy Job Account.: On: OnJob Accountg Def. Set.Job Accounting:Each Job Accounting TLEdit Job Accounting[ ]OnExcess limit Set.Job Accounting Default Setting:Scanner Job AccntFax Job Accountng::ProhibitOn: OnOnly warningExcess limit Setting:Stop job immediatelyStop after job done*Prnt Job Account.Job Accounting Default Setting:EndCopy Job Account.: On: On
