System Settings3-26 ADVANCED OPERATION GUIDEAuto SleepUse to set the machine to enter sleep mode automatically when a presetperiod of time of non-use elapses.NOTE: This setting is displayed only on the inch specification machine.If the Auto Sleep function causes inconvenience, it is recommended to trya longer time period before disabling the function. If you disable thisfunction, it is not displayed.1 Display the Machine default screen, refer to Access the Machine DefaultScreen, on page 3-15.2 Press S or T to select AutoSleep and press [Enter].3 Press S or T to select On or Offand press [Enter].4 Press [Reset]. The Copier Basic screen returns.Auto ClearUsing Auto Clear, once a specified amount of time has passed aftercopying stops (between 10 and 270 seconds), the machine returns to thecurrent default settings. Copies can be made continually using the samesettings (e.g. copy mode, number of copies, and exposure mode) if eachjob is started before the Auto Clear function is activated.1 Display the Machine default screen, refer to Access the Machine DefaultScreen, on page 3-15.2 Press S or T to select Auto Clearand press [Enter].3 Press S or T to select On or Offand press [Enter].4 Press [Reset]. The Copier Basic screen returns.On::Auto SleepMachine Default:PIN # ChangeDisplay ContrastAuto Sleep:OffOn*On:On:Auto ClearAuto SleepMachine Default:PIN # ChangeAuto Clear:OffOn*
