30REDUCTION/ENLARGEMENT/ZOOMThere are three ways to enlarge and reduce copies:● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)● Specifying a ratio with the reduce key, enlarge key, or zoom key..................MANUAL RATIO SELECTION (p.31)● Separately selecting vertical and horizontal ratios ........................................................... XY ZOOM copying (p.32)Ratios that can be selected vary depending on the following conditions:AUTOMATIC RATIO SELECTIONThe ratio is automatically selected based on the original size and paper size.1 Place the original(s). (p.22, p.23)The original size appears in the touch panel.2 Touch the [PAPER SELECT] key andthen select the desired paper size.The selected key ishighlighted and the paperselection screen closes.3 Touch the [AUTO IMAGE] key.A suitable ratio isselected based on theoriginal size and selectedpaper size. (The ratioappears in the touchpanel.)4 Select the number of copies and anyother desired settings, and then pressthe [START] key ( ).Original type setting Original position Selectable ratiosOther than super photo mode Document glass 25 to 400%RSPF 50 to 200%Super photo mode Document glass 50 to 200%RSPF 50 to 141%• If the original size does not appear in thetouch panel, specify the original sizemanually. (p.47)• Automatic ratio selection is not possible ifthe original or paper is a non-standardsize.If paper of the desired size is not loaded inany of the trays, load paper of the requiredsize in a paper tray or in the bypass tray.(p.19)NoteA3A4 PLAINRECYCLEDNoteAUTOIMAGEAUTPAPER1COPY• When automatic ratio selection isselected, the [AUTO IMAGE] key ishighlighted in the main screen.• If the original and paper are in differentorientations, the image is automaticallyrotated to match the paper orientation (forpaper sizes A4 (8-1/2" x 11") or less).• Rotation of the image can be disabled inthe key operator programs. (See the "Keyoperator’s guide".)• If "IMAGE IS LARGER THAN THE COPYPAPER." appears in the touch panel, partof the image will be cut off in the copy.To cancel automatic ratio selection, touchthe [AUTO IMAGE] key.NoteNoteT o cancel automatic ratio selection, touch the[AUT O IMAG E ] key. Automatic ratio s electionalso turns off automatically when theenlargement key, the reduction key, or a[ZOOM] key ( / ) is touched to allowthe ratio to be selected.