4The machine should be installed near an accessible power outlet for easy connection anddisconnection.Be sure to connect the power cord only to a power outlet that meets the specified voltage andcurrent requirements. Also make certain the outlet is properly grounded.Be sure to allow the required space around themachine for servicing and proper ventilation.CAUTIONS ON HANDLING THE MACHINEObserve the following precautions when handling the machine to maintain top performance.Do not drop the machine, subject it to shock or strike it against any object.Store spare toner cartridges in a cool dry place without removing from the package before use.• If they are exposed to direct sunlight or excessive heat, poor copies may result.Do not touch the photoconductive drum (green portion).• Scratches or smudges on the drum will cause dirty copies.CAUTIONS ON LASERTrademark acknowledgements• Microsoft® Windows® operating system is a trademark or copyright of Microsoft Corporation in the U.S.A. andother countries.• Windows® 95, Windows ® 98, Windows® Me, Windows NT® 4.0, Windows® 2000, and Windows ® XP are trademarksor copyrights of Microsoft Corporation in the U.S.A. and other countries.• IBM and PC/AT are trademarks of International Business Machines Corporation.• Acrobat ® Reader Copyright © 1987- 2002 Adobe Systems Incorporated. All rights reserved. Adobe, the Adobe logo,Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.• PostScript ® is a registered trademark of Adobe Systems Incorporated.• Macintosh, Power Macintosh, Mac OS, LaserWriter, and AppleTalk are trademarks of Apple Computer,Inc.• All other trademarks and copyrights are the property of their respective owners.Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture isconnected to the same outlet, the light may flicker.Wave length 785 nm + 10 nm/- 15 nmPulse times (5.871 μs ± 0.1 μs)/7 mmOutput power 0.4 mW ± 0.04 mW (600 dpi)0.2 mW ± 0.02 mW (1200 dpi)Note30cm (12")30cm(12")30cm(12")