66TROUBLESHOOTING AND MAINTENANCEMISFEED IN THE BYPASS TRAY1 Carefully pull the misfed paper out. 2 Open and close the side cover.Make sure that themisfeed message iscleared.The message can alsobe cleared by openingand closing the frontcover.If the message is notcleared, see "A. Misfeedin the paper feed area".MISFEED IN THE MACHINEDetermine the location of the misfeed and remove it appropriately as indicated below.A. Misfeed in the paper feed area1 Open the bypass tray and the sidecover.2 Press gently on both sides of the frontcover and pull it open.3 Carefully remove the misfed paper.Turn the roller rotating knob in thedirection of the arrow to assist inremoving it.Be careful not to tear themisfed paper duringremoval.If paper is misfeed here, go to"A. Misfeed in the paper feedarea" (below).If paper is misfed, go to"B. Misfeed in the fusingarea" (p.67).The fusing unit is hot. Do not touchthe fusing unit when removingmisfed paper. Doing so may cause aburn or injury.Do not touch the photoconductive drum(green portion) when removing the misfedpaper. Doing so may damage the drum andcause smudges on copies.Roller rotating knobWarningCaution
