Basic Operation 3-13Split ModeUse Split mode to create single-sided copies from two-sided originals ororiginals with facing pages (such as books or magazines) as follows.Two-sided to One-sidedCopies each side of a two-sided original onto two individual sheets.The following binding options are available.• Binding Left/Right: The back side and front side of the original arecopied with the same orientation.• Binding Top: The back side is copied rotated 180 ° from theorientation of the front side.Book to One-sidedCopies each page of originals with facing pages (such as books ormagazines) onto two individual sheets.The following binding options are available.• Binding Left: Originals with facing pages are copied from left to right.• Binding Right: Originals with facing pages are copied from right toleft.Follow the steps as below to use Split mode.1 Press [Function].2 Press [Duplex].2112Original CopyNote This operation requires the optional document processor.2121Original CopyNote Original sizes for split mode copy mode are limited to11 × 17", 8 1/2 × 11", A3, B4, A4R, B5R and 8K. Paper sizes arelimited to 11 × 8 1/2", A4, B5 and 16K. Change the paper size to fitthe original to that size.PProgramFunctionUser choiceBasic11×8½"Plain11×17"Color11×8½"Plain8½×11"PlainMP TrayPlainAPS Auto %Zoom100%DensityAutoStapStapLeftOffReady to copy.DensityProgramFunctionUser choiceBasicDensity ZoomCover BookletContinuousScanMixed SizeOriginalsBorderPaperOriginalDuplexMargin/CenteringCollate/OffsetOriginalSizePage #CombineReady to copy.SelectionImageErase