viPrecautions for UseCautions when using the machineWarningDo not place metallic objects or containers with water (flowervases, flower pots, cups, etc.) on or near the machine. This ofsituation presents a danger of fire or electrical shock should theyfall inside.Do not remove any of the covers from the machine as there is adanger of electrical shock from high voltage parts inside themachine.Do not damage, break or attempt to repair the power cord. Do notplace heavy objects on the cord, pull it, bend it unnecessarily orcause any other type of damage. These types of situationspresent a danger of fire or electrical shock.Never attempt to repair or disassemble the machine or its parts asthere is a danger of fire, electrical shock or damage to the laser. Ifthe laser beam escapes, there is a danger of it causing blindness.If the machine becomes excessively hot, smoke appears from themachine, there is an odd smell, or any other abnormal situationoccurs, there is a danger of fire or electrical shock. Turn the mainpower switch off ( position) immediately, be absolutely certain toremove the power plug from the outlet and then contact your servicerepresentative.If anything harmful (paper clips, water, other fluids, etc.) falls intothe machine, turn the main power switch off ( position)immediately. Next, be absolutely certain to remove the power plugfrom the outlet to avoid the danger of fire or electrical shock. Thencontact your service representative.Do not remove or connect the power plug with wet hands, asthere is a danger of electrical shock.Always contact your service representative for maintenance orrepair of internal parts.CautionDo not pull the power cord when removing it from the outlet. If thepower cord is pulled, the wires may become broken and there is adanger of fire or electrical shock. (Always grasp the power plugwhen removing the power cord from the outlet.)Always remove the power plug from the outlet when moving themachine. If the power cord is damaged, there is a danger of fire orelectrical shock.Always hold the designated parts only when lifting or moving themachine.For safety purposes, always remove the power plug from theoutlet when performing cleaning operations.