ivInstallation PrecautionsEnvironmentCautionAvoid placing the machine on or in locations which are unstableor not level. Such locations may cause the machine to fall downor fall over. This type of situation presents a danger of personalinjury or damage to the machine.Avoid locations with humidity or dust and dirt. If dust or dirtbecome attached to the power plug, clean the plug to avoid thedanger of fire or electrical shock.Avoid locations near radiators, heaters, or other heat sources, orlocations near flammable items, to avoid the danger of fire.To keep the machine cool and facilitate changing of parts andmaintenance, allow access space as shown below. Leaveadequate space, especially around the rear cover, to allow air tobe properly ventilated out of the machine.Other precautionsThe service environmental conditions are as follows:• Temperature: 50 to 90.5 °F (10 to 32.5 °C)• Humidity: 15 to 80 %However, adverse environmental conditions may affect the imagequality. Avoid the following locations when selecting a site for themachine.• Avoid locations near a window or with exposure to direct sunlight.• Avoid locations with vibrations.• Avoid locations with drastic temperature fluctuations.• Avoid locations with direct exposure to hot or cold air.• Avoid poorly ventilated locations.15 3/4"40 cm11 13/16"30 cm39 3/8"100 cm3 15/16"10 cm
