5-2 MaintenanceCleaningClean the machine regularly to ensure optimum copy quality.Original Cover, Document Processor and PlatenWipe the rear side of the optional document processor or original coverand the platen with a soft cloth dampened with alcohol or diluted milddetergent.Original Cover (Document Processor)PlatenSlit GlassIf black streaks or other soiling appears in copies when the optionaldocument processor is used, clean the slit glass and white guide with thecleaning cloth provided. The message: Clean the slit glass for originalfed from DP (Clean the slit glass for original fed) may be displayed if theslit glass requires cleaning. After cleaning, press [End].1 Remove the cloth from the cleaning cloth compartment.2 Open the document processor and wipe slit glass A.CAUTION For safety, always unplug the power cord beforecleaning the machine.IMPORTANT Do not use thinner or other organic solvents.Clean the slit glass for original fed from DP.located on the left side and the readingguide on the document processor withthe supplied dry cloth.2.Clean the surface of the slit glass1.Open the document processor.4.Press [END].If the slit glass is dirty, black line3.Close the document processor.will appear on the copy.IMPORTANT Lightly wipe the slit glass and white guide with a drycloth. To remove adhesive material or ink, apply alcohol to a cloth andwipe lightly. Do not use water, thinner, or organic solvents.A