Section 7 COPIER MANAGEMENT FUNCTIONS7-3(2) Accessing the copy management menu screenPerform the following procedure in order to access the copymanagement menu screen.1 With the content of the “Basic” tab displayed, press the[Default Setting/Counter] key.The “Default setting”screen will be displayed.2 Touch the “Management” key on the right side of the touchpanel.Inch specificationsDefault settingCopydefaultMachinedefaultLanguage ManagementEndBOXManagementBypasssettingDocumentManagementRegisterorig. sizePrintreportCountercheckUserAdjustmentDefault setting / CounterMetric specificationsDefault settingCopydefaultMachinedefaultLanguage ManagementEndHard DiskManagementBypasssettingDocumentManagementRegisterorig. sizePrintreportCountercheckUserAdjustmentDefault setting / Counter3 Use the numeric keys on the keypad to enter the 4-digitmanagement code.The factory default management code for 30 cpm copiers is“3000”, for 40 cpm copiers is “4000” and for 50 cpm copiersis “5000”.If the entered management code matches the currentlyregistered one, the copy management menu screen will bedisplayed.Inch specificationsEnter the administrator number CloseMetric specificationsEnter the administrator number Close4 Touch the key that corresponds to the desired procedure.The setting screen for that procedure will be displayed.Inch specificationsCloseEach Mgt.TotalManagementtotalManagem. TotalDefault settingRegister/Sett.ManagementDef. Set.Managementedit OffOnManagement code menuManagementMetric specificationsCloseEach Mgt.TotalManagementtotalManagem. TotalDefault settingRegister/Sett.ManagementDef. Set.Managementedit OffOnManagement code menuManagementNOTES• It is possible for you to change the 4-digit management code. (See“Changing the management code” on page 7-55.)• Perform the following procedure that corresponds to the desiredsetting.
