Section 7 COPIER MANAGEMENT FUNCTIONS7-79● Margin widthPerform the following procedure to determine the default value of thelocation and width of the margins in the margin mode.1 Display the “Copy default” screen.(See “(5) Accessing the copy default settings” on page 7-61.)Inch specificationsDefault settingCopydefaultMachinedefaultLanguage ManagementEndBOXManagementBypasssettingDocumentManagementRegisterorig. sizePrintreportCountercheckUserAdjustmentDefault setting / CounterMetric specificationsDefault settingCopydefaultMachinedefaultLanguage ManagementEndHard DiskManagementBypasssettingDocumentManagementRegisterorig. sizePrintreportCountercheckUserAdjustmentDefault setting / Counter2 Select “Default margin width” in the settings list on the leftside of the touch panel and then touch the “Change #” key.The “Default margin width” screen will be displayed.Inch specificationsDefault setting / CounterCopy defaultChange #Default settingSortAuto RotationDefault margin widthDefault erase widthPreset limitSort : OnRotateLeft 1/ 4" 0"Border 1/ 4" Center 1/ 4"999 SetDefault menuDownSetting mode UpCloseMetric specificationsDefault setting / CounterCopy defaultSortAuto RotationDefault margin widthDefault erase widthPreset limitSort : OnRotateLeft 6mm 0mmBorder 6mm Center 6mm999 SetUpDownChange #CloseDefault settingDefault menu Setting mode3 Touch the “O” key or the “P” key, and the “M” key or the “N”key, as desired, to change the default margins and marginwidths to the desired setting.Inch specificationsLeft""(0~3/ 4)(0~ 3/ 4)Adjust default setting of margin width.Default setting - Copy defaultFront page1 /40Default margin width CloseBackMetric specificationsDefault margin width Back Closemmmm(0~18)(0~18)Adjust default setting of margin width.Default setting - Copy defaultFront page60LeftNOTEIf you want to quit the displayed setting without changing it, touch the“Back” key. The touch panel will return to the screen in step 2.4 Touch the “Close” key. The touch panel will return to thescreen in step 2.5 Touch the “Close” key once again. The touch panel will returnto the “Default setting”screen.6 Touch the “End” key. The touch panel will return to thecontents of the “Basic” tab.
