Section 7 COPIER MANAGEMENT FUNCTIONS7-46● Auto sleep timePerform the following procedure to set the amount of time that willelapse before the auto sleep function engages and turns the copierOFF (O) if no operation has been performed on the copier during thattime.1 Display the “Machine default” screen.(See “(2) Accessing the machine default settings” onpage 7-41.)Inch specificationsDefault settingCopydefaultMachinedefaultLanguage ManagementEndBOXManagementBypasssettingDocumentManagementRegisterorig. sizePrintreportCountercheckUserAdjustmentDefault setting / CounterMetric specificationsDefault settingCopydefaultMachinedefaultLanguage ManagementEndHard DiskManagementBypasssettingDocumentManagementRegisterorig. sizePrintreportCountercheckUserAdjustmentDefault setting / Counter2 Select “Sleep mode changing time” in the settings list on theleft side of the touch panel and then touch the “Change #”key.The “Sleep mode changing time” screen will be displayed.Inch specificationsMachine default CloseDefault settingSleep mode changing timeLow power mode chng. timeSelect Copy output modeSelect FAX output modeSelect the main mode60 Minute15 MinuteInner trayInner trayCopy modeDefault menuDownChange #Setting mode UpDefault setting / CounterMetric specificationsMachine defaultSleep mode changing timeLow power mode chng. timeSelect COPY output modeSelect FAX output modeSelect main mode60 Minute15 MinuteInner trayInner trayCOPY ModeUpDownChange #CloseDefault settingDefault menu Setting modeDefault setting / Counter3 Touch the “+” key or the “–” key to change the displayed timeto the desired setting (between 1 minutes and 240 minutes).Inch specificationsSet Changing time to turn automatically into sleep modeafter last setting,or when copying is done.Sleep mode changing timeDefault setting - Machine defaultMinute+–Back CloseMetric specificationsSet Changing time to turn automatically into sleep modeafter last setting,or when copying is done.BackSleep mode changing timeDefault setting - Machine defaultMinuteCloseNOTES• The setting can be made to 1 minute, 5 minutes, 15 minutes, 30minutes, 45 minutes, 60 minutes, 90 minutes, 120 minutes, 180minutes or 240 minutes.• It is recommended that you try to set a longer time interval beforethe auto sleep function engages if you use the copier frequently, andto a shorter time if there are long intervals between use.• If you want to quit the displayed setting without changing it, touchthe “Back” key. The touch panel will return to the screen in step 2.4 Touch the “Close” key. The touch panel will return to thescreen in step 2.5 Touch the “Close” key once again. The touch panel will returnto the “Default setting”screen.6 Touch the “End” key. The touch panel will return to thecontents of the “Basic” tab.
