33ENBasic photography/frequently-used options1Displaying information during playbackThe INFO button can be used to choose the information displayed during playback.Overall display (P. 25)Simplified display (P. 25)Highlight & Shadow display*Light box display * Histogram display *Image only *INFOINFOINFOINFOINFOINFOINFOINFOINFOINFOINFO2011.05.01 12:30 15100-00154:3 L N×10×101615 15Shadow Highlight 2011.05.01 12:30 15×10×10F5.6F5.6±0.0±0.0G±10G±10A±10A±10AdobeAdobeNaturalNaturalISO 400ISO 400250250+2.0+2.0 45mm45mm1/84032×3024×10×104:3 L N2011.05.01 12:30 15100-0015WBAUTOPDisplayed when [On] is selected for [G/Info Settings] > [q Info]. g “Customizingcamera settings” (P. 81)Histogram displayDisplay a histogram showing the distribution of brightness in the image. The horizontal axisgives the brightness, the vertical axis the number of pixels of each brightness in the image.Areas above the upper limit at shooting are displayed in red, those below the lower limit inblue, and the area metered using spot metering in green.Highlight & Shadow displayAreas above the upper limit of brightness for the image are shown in red, those below thelower limit in blue. [Histogram Settings]: g “Customizing camera settings” (P. 81)Light box displayCompare two images side-by-side. Press Q to select the image on the opposite side of thedisplay. In addition to adjusting settings using [G/Info Settings] in the custom menus, youwill also have to select [mode2] for [q Close Up Mode]. g “Customizing camera settings”(P. 81)The base image is displayed on the right. Use HI to select an image and press Q tomove the image to the left. The image to be compared to the image on the left can beselected on the right. To choose a different base image, highlight the right frame andpress Q.Press U to zoom in on the current image. To view other areas of the picture, press theINFO button and use FG or the control dial.Use FGHI to view other areas of the picture. The image displayed changes each timeU is pressed.2 x 2 x 2x 53 54U U U*•••
