68 ENPlayback options5Image overlayUp to 3 frames of RAW images taken with the camera can be overlaid and saved as aseparate image. The image is saved with the record mode set at the time the image issaved. (If [RAW] is selected, the copy will be saved in [YN+RAW] format.)1 With a RAW image displayed during playback, press Q and select[Image Overlay].2 Select the number of images in the overlay and press Q.3 Use FGHI to select the RAW images thatwill be used in the overlay and press Q toselect.When you have selected the number of imagesspecified in Step 2, the overlay will be displayed.•RAW RAW RAWRAWRAW RAW RAWImage OverlayBack Set4 Adjust gain.Use HI to select an image and use FG to adjustgain.Gain can be adjusted in the range 0.1 – 2.0. Check theresults in the monitor.•• ×1.5×1.5×0.3 ×0.5Image OverlayBack Set5 Press Q. A confirmation dialog will be displayed; select [Yes] and pressQ.% TipsTo overlay 4 or more frames, save the overlay image as a RAW file and use[Image Overlay] repeatedly.Audio recordingAdd an audio recording (up to 30 sec. long) to the current photograph.1 Display the image to which you want to add anaudio recording and press Q.Audio recording is not available with protected images.Audio recording is also available in the playback menu.2 Select [R] and press Q.To exit without adding a recording, select [No].•••JPEGmR<RotateJPEG EditBack Set3 Select [R Start] and press Q to beginrecording.To stop recording part-way through, press Q.4 Press Q to end recording.Images with audio recordings are indicated by a Hicon.To delete a recording, select [Erase] in Step 2.•••RR StartNoEraseBack Set•
