55ENOther shooting options23D PhotographyTake 3D photographs. The results can be viewed on devices that support 3D display.The camera monitor can not be used to view images in 3D.1 Rotate the mode dial to SCN.2 Select [3D Photo] and press Q.3 Press the shutter button to take the first shotand keep the shutter button in this position.Focus and exposure are locked at the values for thefirst shot.• CancelLine up the image.4 Move the camera horizontally without rotation until the first shot issuperimposed on your subject. The camera will take the second shotautomatically.If the camera does not take the second shot automatically or if you released theshutter button before the second shot was taken, press the shutter button all the waydown again.Do not adjust focus or zoom.5 The two images are combined automatically.If the camera displays the message [3D photo was not created.], take the photographagain. The two shots are saved to separate files.# CautionsAdjusting zoom after the first shot is taken cancels the first shot.The camera focuses on the subject in the center focus point only.Image size is fixed at 1920 × 1080.3D and manual focus lenses can not be used.Depending on the lens and camera settings, the 3D effect may not be visible.The camera will not go to sleep during 3D photography.RAW photography is not available.Frame coverage is not 100%.$ NotesTo retake the photograph after taking the first shot, press D. Press Q to save the firstshot and exit without recording a 3D image.••••••••••••
