1ENSelecting the aperture valueand shutter speed for shootingpictures (M mode)This mode enables the user to set the aperturevalue and shutter speed manually.1 Set the mode dial to M.1/1000 F2.8+2.0M12 M4INN ORMNRShutter speed AperturevalueM mode indicatorDifference betweenthe current andcorrect exposures2 After pressing 7, select theaperture value / shutter speed using789:, and press the o button.9 : Aperture value becomes larger.: : Aperture value becomes smaller.7 : Shutter speed becomes faster.8 : Shutter speed becomes slower.When the difference between the currentand correct exposures exceeds EV±3.0, theindicator appears red.Long-exposure (bulb) shootingSet the shutter speed to [BULB] by pressing8. The shutter stays open while the shutterbutton is pressed and held.The maximum time that the shutter canremain open is 8 minutes. This is possibleonly when [ISO] (p. 31) is set to [64].Smoothing out skin tone andtexture (I mode)The camera finds a person’s face and gives theskin a smooth, translucent look for taking thepicture.1 Set the mode dial to I.12M4INN ORMI mode indicator2 Point the camera toward thesubject. Check the frame appearingaround the face detected by thecamera, and then press the shutterbutton to take the picture.The unedited image and edited image are bothsaved.If the image cannot be retouched, only theunedited image is saved.The frame may not appear or may takesome time to appear for some subjects. Inaddition, this function may have no visibleeffect on some subjects.The [IMAGE SIZE] of the retouched imageis limited to [J] or lower.●●