Olympus SP-590 UZ Instruction Manual

Also see for SP-590 UZ - Digital Camera - Compact: Basic Manual Specifications Instruction manual Manual de instrucciones Manuel d'instructions

Contents

ENUsing a microSD AttachmentDo not use the attachment with Olympusdigital cameras that do not support thismicroSD Attachment, as well as with otherbrands of digital cameras, computers,printers and other devices that supportxD-Picture Card. Doing so not only maydamage the pictures taken, but may alsoresult in the malfunction of the device.If the microSD card cannot be removed,do not use force. Contact authorizeddistributors/service centers.Cards compatible with this cameramicroSD cardmicroSDHC cardFor a list of tested microSD cards, pleasevisit our website (http://www.olympus.com/).Sending imagesYou can send images to a computer orPictBridge compatible printer by using theUSB cable provided with the camera.To send data to other devices, removethe attachment from the camera and usea commercially available microSD cardadapter.Handling precautionsDo not touch the contact area of theattachment or microSD card. Doing somay cause failure in reading the images.When fingerprints or stains are found onthe contact area, wipe the area with a softdry cloth.Taking pictures with theOlympus Wireless RC FlashSystemYou can take pictures with a wireless flashwhen using a flash compatible with the OlympusWireless RC Flash System. This enablesmulti-flash photography using multiple flashunits compatible with this system. The camera’sbuilt-in flash is used for communication betweenthe camera and flash.For details about operation of a wirelessflash, refer to the instruction manual for thespecial external flash.1 Set the wireless flash based on theguidelines below.Wireless flash setup range guidelinesThe setup range varies depending on theambient environment.5m50°50°10m30°30°50°50° 30°30°Point the remotesensor towardthe cameraFlash direction2 Turn on the wireless flash.3 Use the MODE button on thewireless flash to set to RC mode,and make the channel and groupsettings.The group is set to A. (The B and C settings donot work.)4 Turn on the camera, and press the# button to flip up the built-in flash.5 Set [QFLASH] (p. 36) on thecamera to [#RC], and set thechannel (CH1 to CH4) to the samesetting as the wireless flash.●