UNLOADING THE FILMThe camera automatically rewinds the film when youreach the end of a roll.Make sure the motor has stoppedand the E is blinking on the LCDpanel, before opening the backcover and removing the film.Rewinding the film beforethe end of the rollIf the power is turned OFF while rewinding, operationswill stop. Rewind mode, however, is not canceled.Rewinding will continue when the power switch isturned ON again.The final number of exposures may sometimes exceedthe number of exposures specified on the film.After confirming that the power is ON,press the mid-roll rewind button with thetip of a ballpoint pen, or the like. Do notuse an instrument with a sharp tip.21