When the distance at which you want to shoot is predetermined, youcan set the focus in advance and wait until the photo opportunitywhen autofocusing is difficult (see P. 70).When you want to wait until the photoopportunity comes, focus on the subject firstby using autofocus. Then press the PF button.After making sure is blinking on the LCDpanel, press the shutter release buttonwhen the photo opportunity comes.Note: Manual focusing is possible using thezoom buttons, but zooming cannot beperformed in the PF mode. To cancel the PFmode, press the PF button again.Note: There are two PF speeds, available formanual focusing, functioning in the samemanner as the zoom.Power Focus52comes. Manual focusing is possible in this mode, so PF can also be used
