Aim the remote control at the camera from within the range shown inthe illustrations below, and press the button. The shutter will be releasedafter the autofocus beep is heard and the AF illuminator blinks.When releasing the shutter from in front of thecamera: When releasing the shutter from behind thecamera:Notes:Use selftimer outside this range.When the IS/L B-28 H.Q. CONVERTER 0.8X ismounted, the remote control may not work evenwithin the above range because the signaltransmission is blocked by the converter.Important: After the shot(s), be sure to press the selftimer/remote control button again to cancel theRemote Control mode.Notes:Use the remote control from behind the camera to preventthe camera from shaking by pressing the shutter releasebutton when in macro photography or when the tele-converter is mounted.When using the remote control from behind the camera,aim at the remote control sensor on the top of the grip.57