CMC 356-Related Products and Accessories1179.6.5 Adapter Cable for Scanning HeadsThe adapter cable VEHK0010 connects the scanning heads OSH256,TK 326 and TVS 6.15/1 directly to a CMC 356 test set. The scanning headsconnection cable is simply extended by the adapter cable plugging the5-pole LEMO connectors into each other. The 16-pole LEMO connector isplugged into the LEMO socket "ext. Interf." at the rear of a CMC test set.From there the scanning heads are supplied with 14 VDC and meter pulsesare fed to the counter input of the CMC.Figure 9-15:Connecting an opticalscanning head to theCMC 356 "ext. Interf."connectorFigure 9-16:Adapter cable for scanningheadsFor ordering information about scanning heads, please refer to table 9-5,"Order numbers overview" on page 128.!134VEHK0010OpticalscanningheadCMC 356 rear side,connector "ext Interf."14V DCPulse inputGNDMeter to be tested