CMC 356 Reference Manual967.3 Two-Phase OperationFor some applications it is beneficial to have two independent currents,each higher than 32 A rms , or a higher compliance voltage available.7.3.1 2 x 64 A High Current Mode (LL-LN)2 x 0 ... 64 A (±90 ADC), max. 35 V peak , 2 x 500 VA at 40 ASince the current over the N socket is limited to 32 Arms (45 A DC ), the thirdphase is used to support the N socket.Observe the safety instructions given in Section 7.1 on page 91 when usingthis operating mode.Figure 7-6:Two-phase operation,2 x 64 A high current modeLoad1’N 1 ’2’N 2 ’
