PAT DS 350 Operator's Manual
Also see for DS 350: User manualTroubleshooting manualReplacement instructions
                                              | |
Contents
| 
Configuration Setup© PAT Revision E // SB // 09/03/02 190137_E154.2 Quick Setting of the ReevingIf, during the crane operation, the reeving is modified, the LMI system has to be adjustedto this modification. The input of the reeving can be carried out directly without having togo through the whole LMI programming procedure again:Call LMI Programming Procedure.Directly call function "Quick Setting of theReevings".Note:The direct call is impossible, if the system hasbeen turned off for more than 2 hours.input of reeving:increase reevingdecrease reevingconfirm reevingConfirm modification.(select again the function upon faulty input)Note:If a configuration is selected which is not available on the present crane, the system willnot accept the selection and the display will indicate the error code E04. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine