Power Preferences337To set the Auto-off after interval:1. From the General Preferences list, select Power.2. Tap the Auto-off after pick list.3. Select the setting you want to use for the automatic shutoff feature: 30 seconds,1 minute, 2 minutes, or 3 minutes.4. Tap Done.Stay on in CradleYou can choose to leave your handheld on when it is in the cradle/cable, so thatyou can continue to view your data. By default, your handheld remains on whenit is in the cradle/cable and is connected to a power source.To change the cradle/cable setting:1. From the General Preferences list, select Power.2. Tap the Stay on in Cradle pick list.3. Select Off to turn off your handheld when it is in the cradle/cable.4. Tap Done.Beam ReceiveYou can choose to turn off the Beam Receive feature. This prohibits anyone frombeaming information to your handheld. It also results in a slight saving of batterypower. By default, Beam Receive is enabled.To turn off the Beam Receive feature:1. From the General Preferences list, select Power.2. Tap the Beam Receive pick list.3. Select Off to disable receiving beamed information.4. Tap Done.Power on when opened and Power off when closedYou can choose to automatically turn your handheld on and off when you openand close the Graffiti 2 input area. By default, your handheld turns on when youopen it and remains on when you close it. The Power off option is available onlywhen the Power on when opened setting is active.To change the power-on setting:1. From the General Preferences list, select Power.2. Tap the Power on when opened check box to deselect it.3. Tap Done.