Chapter 5 Page 1344. Click OK.To prepare a Macintosh for a modem HotSync operation:1. Confirm that the Macintosh modem is connected and turned on,and that no communications applications, such as fax or telephonysoftware, or AppleTalk networking are running on that serial port.Note: Make sure the Macintosh is disconnected from all onlineservices, such as CompuServe and America Online(AOL). This helps to avoid conflicts with the serial port.2. Double-click the HotSync Manager icon in the Palm folder.3. Click the Serial Port Settings tab.4. Under Check for handheld connection using, click Modem Setup.5. Adjust the following options as needed.SetupStringIdentifies the setup string for your particularmodem. Not all modems require a setup string.Refer to your modem manual and enter the setupstring if recommended by the manufacturer.Modem Identifies the type of modem connected to yourMacintosh. If your modem does not appear onthe list, use the Hayes Basic setting, or chooseCustom to enter a command string. Refer to themanual that came with your modem to find theappropriate command string.
