Page 208 Setting Preferences for Your Handheld3. Tap the command you want from the Command list. If thecommand requires additional information, a field appears to theright of it for you to enter the information. The followingcommands are available:Wait For Tells your handheld to wait for specific charactersfrom the TCP/IP server before executing the nextcommand.Wait ForPromptDetects a challenge-response prompt coming fromthe server and then displays the dynamicallygenerated challenge value. You then enter thechallenge value into your token card, which in turngenerates a response value for you to enter on yourhandheld. This command takes two arguments,separated by a vertical bar (|) on the input line.Send Transmits specific characters to the TCP/IP server towhich you are connecting.Send CR Transmits a carriage return or LF character to theTCP/IP server to which you are connecting.Send UserIDTransmits the User ID information entered in theUser ID field of the Network Preferences screen.SendPasswordTransmits the password entered in the Passwordfield of the Network Preferences screen. If you didnot enter a password, this command prompts you toenter one. The Password command is usuallyfollowed by a Send CR command.Delay Tells your handheld to wait a specific number ofseconds before executing the next command in thelogin script.Get IP Reads an IP address and uses it as the IP address foryour handheld. This command is used with SLIPconnections.Prompt Opens a dialog box and prompts you to enter text ofsome kind (for example, a password or a securitycode).End Identifies the last line in the login script.
