3.1 Overview of Settings3-33.1.2 Setting ProcedureThe setting procedure is as follows.Use Programming software Control FPWIN GR7 (hereinafter referred to FPWIN GR7) for thesettings.Item Outline of operation Reference1 Initial setting of Ethernet /IP Enable EtherNet/IP communication in the "Ethernet settings"and make the initial setting of EtherNet/IP. p.3-42 Settings of connection usingFP0H as originatorRegister EDS Files of target devices. p.3-9Add targets in the scan list. p.3-10Register connection information (such as connected targets,cyclic communication, corresponding data areas and sizes). p.3-113 Settings of connection usingFP0H as targetAdd I/O map in the scan list. p.3-17Register the tag/instance information connected. p.3-184 Confirmation of load factorcalculation Confirm the load factor calculation is 100% or less. p.3-215 Saving of Ethernet/IP settings Save the settings of EtherNet/IP. p.3-22
