Panasonic AG-1980P Service Manual

Also see for ProLine AG-1980P: Operating instructions Service manual Operating instructions

1-13Storing TV Channels on your VCRPRESET/FINE/NORMALIntroductionThe VCR is fitted with its own tuner (just like a normal TVset) and can be preset to receive up to 1 81 TV broadcaststations.Preparations•Turn the TV on.• Select Channel 3 or 4 on the TV for video playback.• Set the VCR/TV to “VCR".TV mode CATV NORMAL modeIP•HIT- i 3CATV HRC modeI—1.id H[ H . i itvp. |w,'l;d.CM;1CATV IRC mode'd v. i.*•;Direct TuningVour VCR is preset at factory. This means that all channelscan be received at the program positions shown in the charton the next page. This is achieved by selecting the desiredTuning mode.•Blanking unwanted channels so that they will be skippedduring the channel selection will allow you to find yourdesired channel quickly. Refer to the next page how toblank program positions.Selecting the Tuning ModeThis VCR can select from among 4 tuning modes: TV,CATV, CATV H. CATV I.1 Press PRESET/FINE/NORMAL.2 The tuning mode can be changed by pressing ANTSELECT.3 Press PRESET/FINE/NORMAL twice to select the VCRnormal operation mode.( 10)GENERAL INFORMATION 1Storing TV Channels on your VCRFine Tuning Procedure CHANNEL CHARTV Press PRESET/FINE/NORMAL twice. * TV mode2 Press TRACKING/V-LOCK "+" or " to correct tuning.•“A" indicator does not appear.•To return the tuning to its former state, press ANTSELECT.CHANNELDESIGNATIONSCHANNELRECEIVED OFFTEH AIRCHANNELSELECTION &INDICATION ONVTR3 Press PRESET/FINE/NORMAL. VHF 2-13 2-13Blanking of unoccupied program positions UHF 14-69 14-691 Press PRESET/FINE/NORMAL.2 Press v or A (channel button) to select the programposition that is to be skipped.• CATV modes (NOR, HRC, IRC)3 Press ADD/DELETE. (“—" appears on the ProgramPosition Display.)• Repeat steps 2 and 3 for all program positions whichare not occupied by a TV station. Afterwards, theseCHANNELDESIGNATIONSCATV CHANNELRECEIVEDFROM CABLECHANNELSELECTION &INDICATION ONVTRprogram positions can no longer be called up.•To cancel the blanked program position, select theBROADCASTVHF 2-13 2-13corresponding program position on VCR and thenpress ADD/DELETE. CATV LOWBAND A-5-A-1 95-994 Press PRESET/FINE/NORMAL twice. CATV MID/SUPER BANDS A-W 14-36CATV HYPERBAND AA-FFF 37-65ULTRA BANDGGG-WWWWWW+1-WWW+12 66-94100-125 100-125SPECIAL CATVCHANNEL5A(HRC, IRC only)1(HRC, IRC only)(It)