Panasonic AG-1980P Service Manual

Also see for ProLine AG-1980P: Operating instructions Service manual Operating instructions

1-23GENERAL INFORMATION 1EditingInsert EditingThis function allows you to smoothly insert new scenesbetween selected Editing "In" and "Out" points on anexisting recording.Insert Editing cannot be executed on blank tape segments.In such a case, it is necessary to use Assembly Editing first.Preparations•Connect a Movie Camera or another VCR to this VCR asshown in the diagram on page 28.• Insert a recorded cassette with an erasure prevention tab.•Select the corresponding input connectors.(Refer to “Preparations” on page 28.)• Set DETAIL/NOR/EDIT to “EDIT.2*3- 00 0: 00.00zJt.-t- 4fA 4"4 ftk 4.1Operations1 Press JOG/SHUTTLE.2 Search for Editing Out (ending) point with SHUTTLERing and JOG Dial. Put the VCR into Still playback.3 Press RESET to reset the Tape Counter to “0:00.00”.4 Search for Editing In (starting) point with SHUTTLE Ringand JOG Dial. Put the VCR into Still playback.5 Press INSERT. (INSERT Indicator is lit.)• If you want to replace the original sound-track on thenormal audio track with a new sound-track, pressAUDIO DUB. (AUDIO DUB Indicator is lit.)6 Press PAUSE/STILL to start Insert Editing.• Insert Editing stops when the tape reaches editing outpoint (counter position “0:00.00”). The VCR switches toStill playback.Notes:• When using the Insert Editing function, switching to theSP mode is recommended.• Normal audio is retained in any insert video edit,while any recorded Hi-Fi audio will be lost.Audio DubbingThis function is used to add background music, narration,etc. on an already recorded tape.Preparations•Insert a recorded cassette with an erasure prevention tab.•Select the corresponding input connectors.(Refer to "Preparations” on page 28.)1 2^4 > 4JW0?J[/J3 JJJ'JA OUB V> A.DU8 J4 >QticmiJTTjjmjjjmunwROperations1 Press PLAY and search for the starting point where youwish to record the new sound-track.2 Press PAUSE/STILL at the starting point of AudioDubbing.3 Press AUDIO DUB. (AUDIO DUB Indicator is lit.)4 Press PAUSE/STILL to start Audio Dubbing.5 Stop Audio Dubbing by pressing STOP.Note:A new sound is dubbed onto the normal audio track of thetape, and the original sound is erased. However, theoriginal sound is maintained on the Hi-Fi audio tracks. Thismeans that Audio Dubbing is made monaurally.• Press AUDIO OUT to select the normal audio track tolisten to the sound recorded with Audio Dubbing.• Select the Hi-Fi audio tracks to listen to the original sound.• Set Hi-Fi/NORMAL MIX to “ON” to listen to both theoriginal sound and the sound-track added by AudioDubbing.(30) (31)