Panasonic AG-BS300E Operating Instructions Manual

Also see for AG-BS300E: Operating instructions

Contents

Panasonic AG-BS300E Operating Instructions Manual Manual pdf 19 page image

19Menu DisplaySetting menu can be displayed in the video output from the VIDEO OUT (MENU) connector in the rear panel of this unit.Basic structure of the menuMenu setting is operated with the MENU switch and the SELswitch.Menu is divided into main menu, and submenu and settingitems.Set data is written and saved into the internal memory of thisunit.Basic operation of menu display1 Press the MENU switch (page 13) on the front panel for 3seconds. Setting menu is displayed in the video outputfrom the VIDEO OUT (MENU) connector.There are four setting menus, SYSTEM, GENLOCK,DOWNCON SETTING and SETUP.2 To open the submenu, turn the SEL switch aligning thearrow with SYSTEM, GENLOCK, DOWNCON SETTINGor SET UP and then press the SEL switch.3 Items to set will flash when the arrow (>) is moved tothe item to set by turning the SEL switch, and pressingthe SEL switch. Change the setting of the item by turningthe SEL switch.To increase the setting value:Turn the SEL switch clockwise.To decrease the setting value:Turn the SEL switch counter-clockwise.To switch between ON/OFF of the setting value:Turn the SEL switch clockwise to set ON. Turn the SELswitch counter-clockwise to set OFF.4 Press the SEL switch.Flashing of the setting value will stop, and the settingvalue will be set.5 Repeat steps 3 and 4 to continue to change othersettings on the same page.6 To return to the SYSTEM, the GENLOCK, theDOWNCON SETTING or the SETUP screen from thesubmenu screen, move the arrow to the menu title byturning the SEL switch, and press the SEL switch.7 Press the MENU switch once the setting is completed.It will exit from the menu setting mode, and return to thenormal operation mode.When the system format of the camera recorder is SD,1080-23.98PsF, 1080-24PsF or 720-60P, the DOWNCONSETTING item is not displayed in the menu.MAIN MENUSYSTEMGENLOCKDOWNCON SETTINGSETUPMAIN MENUSYSTEMGENLOCKDOWNCON SETTINGSETUPGENLOCKGL PHASE :HD SDIH PHASE COARSE :+ 28H PHASE FINE :+ 28GENLOCKGL PHASE :HD SDIH PHASE COARSE :+ 28H PHASE FINE :+ 28MAIN MENUSYSTEMGENLOCKDOWNCON SETTINGSETUP