23Specifications[General]Operation ambient temperature:0 °C to 40 °C (32 °F to 104 °F)Storage temperature:-20 °C to 60 °C (-4 °F to 140 °F)Operation ambient humidity:10 % to 85 % (relative humidity)Weight:approx. 4.8 kg (approx. 10.6 lb)External dimensions (width ° height ° depth):432 mm ° 44 mm ° 360 mm17.0 inches ° 1.7 inches ° 14.2 inches(Excluding rack mount adapter and protrusions such asleg base)[Power Supply Unit]AC IN:AC inletAC 100 V - 240 V, 50/60 Hz, 1.6 A - 0.6 ADC IN 12 V:XLR 4 pin, with switchDC 12 V (DC 11 V - 17 V), 1.1 ADC OUT 24 V:Round 5 pinDC 24 V, maximum 4 AREMOTE:Round 10 pinDC 13 V, 0.3 A[Transfer Unit]DC power supply transfer (this unit > AG-CA300G):Maximum 100 m(When using conductor cross-section area of 3.5 mm 2 orlarger)Signal transfer (this unit <> AG-CA300G):Maximum 100 m(When using the 5C-FW BNC cable)[Analog Signal Input Unit]GENLOCK IN:BNCHD: Analog 3-value sync, ± 0.3 V, 75 h1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,720/59.94P, 720/50PSD: Black burst, 75 h480/59.94i, 576/50iRET IN VIDEO:BNCVBS, 1 V [P-P], 75 h480/59.94i, 576/50i[Analog Signal Output Unit]VIDEO OUT:BNCVBS, 1 V [P-P], 75 hGENLOCK LOOPOUT:BNC[Digital Signal Input Unit]RET IN SDI:BNC, 75 hFor HD SDI, compliant to SMPTE292M/299M Standard1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,720/59.94P, 720/50PFor SD SDI, compliant to SMPTE259M-C/272M-AITU-R.BT656-4 standards480/59.94i, 576/50iCA IN:BNC, 75 h[Digital Signal Output Unit]SDI OUT1:BNC, 0.8 V [P-P], 75 hFor HD SDI, compliant to SMPTE292M/299M Standard1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,720/59.94P, 720/50PFor SD SDI, compliant to SMPTE259M-C/272M-AITU-R.BT656-4 standards480/59.94i, 576/50iSDI OUT2:BNC, 0.8 V [P-P], 75 hFor HD SDI, compliant to SMPTE292M/299M Standard1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,720/59.94P, 720/50PFor SD SDI, compliant to SMPTE259M-C/272M-AITU-R.BT656-4 standards480/59.94i, 576/50iCA OUT:BNC, 75 h[Control Unit]REMOTE:Round 10 pin[External Device Connection Unit]INCOM/TALLY:D-Sub 9 pinINCOM:4-wire format 0 dBm (600 h balanced)RTS format 1 V [P-P] (200 h balanced)TALLY:Switchable between supplied voltage and contactDC 12 V maximum for supplied voltage (8 V to 12 V)[Intercom Unit]INCOM:XLR 5 pinInrush current, measured according to European standardEN55103-1: 10.0 AWeight and dimensions when shown are approximately.Specifications are subject to change without notice.Input: AC 100 V - 240 V, 50/60 Hz, 1.6 A - 0.6 ADC 12 V, 1.1 AOutput: DC 24 V, 4 Aindicates safety information.