Panasonic AG-CPD20P Operating Instructions Manual

Also see for AG-CPD20P: Operating instructions

Contents

Panasonic AG-CPD20P Operating Instructions Manual Manual pdf 44 page image

44Use the functions described below to manipulate video output by the camera connected to the [CAMERA 1] connector andsound from the microphone.Press the [LIVE/ARCHIVE] button to view live video.A commercially available cameras connected to the [CAMERA 2, 3, 4, 5, 6] connectors cannot be controlled.Viewing Live VideoRETURN MENUCONTROL PANELON/OFFBacklight compensation buttonZoom buttonsAUTO ZOOM buttonIR MODE buttonCAMERA SELECT buttonLIVE/ARCHIVE button◎ Selecting picturesPress the [CAMERA SELECT] button.Each press of the button toggles the main and sub pictures.Holding the button pressed for more than two secondsswitches the preset (Preset1, Preset2 or Preset3).Notes:Color Camera operations in the Remote Control Panelmenu cannot be accessed when one of the [CAMERA] [2]to [6] connector input is selected.If the preset setting is enabled, the main screen forPreset1 is displayed with selection of the [CAMERASELECT] button.◎ ZoomingTo view the overall scene, press the [W] button and zoomout.To view fine details, press the [T] button and zoom in.1. Press the [W] button or the [T] button.The camera zooms in or out while the button is keptdepressed.or2. Release the button when reaching the desiredimage size.Pressing [AUTO ZOOM] buttonIt zooms in the image to the target ratio and then pausesbefore zooming out towards the wide angle end. Whenthe zoom in operation goes beyond the target ratio, it firstzooms out to the target ratio.••◎ Making a backlit image easier to viewA dark subject against a bright background can be madeeasier to view.Press the [ ] button.This button toggles between “ON” and “OFF” at each press.Set this button to “OFF” for normal operation.◎ Making a dark image easier to viewUse the infrared mode to make dark images easier to view.Press the [IR MODE] button.The IR ON appears.Each press of this button switches the function from “AUTO”,“ON” and “OFF”. Set this function to “AUTO” for normaloperation.Note:This function can be used together with “Adjusting imagebrightness” (on page 47) to make an image brighter.