Panasonic AG-DV1DC E Operating Instructions Manual

22 - English -Recording FeaturesVideo InS-Video InVHF ConnectingCable (notsupplied)TV(To View)A/V Cable(Supplied)To Audio InTo Video InRecording:VCR (Rear)To S-Video In(If there is S-Video In) • For technical reasons, dubbing a tapemay reduce its quality.• If the Time Code is displayed in the LCDmonitor, it cannot be reset.• Only the DATE/TIME, when displayed, willbe recorded on the tape.CAUTION:Unauthorised exchanging and/orcopying of copyrighted recordings maybe copyright infringement.A/V OUTS-VIDEO OUTSource (Playing)unitCopying your Tapes toS-VHS or VHS CassetteMonitor with your TV1 Insert a pre-recorded tapeinto the source (playing) unit and ablank tape, with record tab in place,into the target VCR (Recorder).2 Press MENU to display the MAINMENU screen.3 Press +/– to select REC MODE , thenpress SET to display the REC MODEmenu screen.4 Press +/– to select AV JACK , thenpress SET to select OUT/PHONES.• Press MENU twice to exit.• “DV IN” will appear on the screen.5 Press (PLAY) on this unit. When thetape reaches the point from which youwant to start dubbing, press PAUSE.6 Place the VCR into REC/PAUSEmode. (See VCR manual.)7 Simultaneously, press PAUSE onboth units to begin copying.8 Press STOP on both units whencopying is completed.S-VideoCable (notsupplied)Audio InNote• Turn the TV ON and select its VCRchannel (either CH3 or CH4).• Set the VCR/TV Selector on therecording VCR to VCR.Before you begin• Connect this unit and VCR to theirpower sources.• Connect this unit to a VCR as illustratedleft.• Turn both units on.• Set the recording VCR’s Input SignalSelector to LINE.• Before using S-VIDEO Connector,insert the DC Cable into the DC INTerminal. (p. 10)DC Cable(Supplied)