- 123 -∫ To disconnect USB Cable safely(For Windows)Select the icon in task tray displayed on the PC, and then click the on-screen display thatlets you eject [AG-DVX200].≥ Depending on your PC’s settings, this icon may not be displayed.(For Mac)Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB Cable.About the PC displayWhen the unit is connected to a PC, it is recognized as an external drive.≥ Removable disk (Example: ) is displayed in [Computer].Example folder structure of a SD card: The following data will be recorded.1 Up to 999 still pictures in JPEG format([01000001.JPG] etc.)2 MOV format motion picture data([01000001.MOV], etc.)3 MP4 format motion picture data([01000001.MP4], etc.)4 JPEG format still pictures created fromthe motion picture5 The motion picture thumbnails6 AVCHD format motion picture files([00000.MTS] etc.)7 For managementAbout the screen indication of the unit≥ Do not disconnect the USB Cable, battery, or AC adaptor while the access lamp is on or cardaccess icon ( ) appears on the unit screen.≥ If the screen does not change when the unit is operated while connected to a PC, disconnectthe battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or ACadaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may bedestroyed when above operation is performed while accessing the SD card.)Data recorded using AVCHD format has excellent compatibility with computers, due to its fileform; however, it contains not just image and sound data, but also various important information,and it is associated using a folder structure which is like a figure. If even part of this information ischanged or erased, faults may occur; for example, it may not be possible for the data to berecognized as AVCHD data, or it may no longer be possible for the SD card to be used in anAVCHD device.Data from a computer cannot be written to the SD card of this device.DCIMCAM_SD100CDPFQ 101YAQH0 AVCHDTNBDMVAVCHDPRIVATEPANA_EXT 102RARH0 103CDPFS
